Payment & Shipping Terms:
|Material:||Stainless Steel Or Carbon Steel||Capacity:||600 Liters Per Hour Or More|
永信贵宾网TYA-H is special designed to treat high water content oils such as lubricant oil, crude oil, engine oil, hydraulic oil, turbine oil, fuel oil, diesel oil and freezing machine oil, as well as other lubricant oil which is equipped with a high effective vacuum dehydration system, with the big capacity to separate a lot of water from the oil. Can not only remove the mass water, but also remove the trace water and impurity with a high precision.
1. High water removal and demulsifying capacity. Remove large amount of water and minimal amount of water
永信贵宾网 2. Film evaporation and molecule evaporation technology enable quick demulsifying, and make the turbid and
emulsified oil become limpid and clear.
3. The technology is of a lifetime service (above 20 years), which avoid the periodic filter replacement, also
reduces the cost of purification and the intensity of work.
永信贵宾网 4. With strong impurity removing capability, its automatic back-washing filter element can remove large amount
Table 1 TYA-H Oil dehydrator Technology Standard
|Vacuum degree||Mpa||-0.06 ~- 0.095|
|Flash point(open cup)||℃||GB443-89|
|Note:The data is only for your reference,it will be changed with changing technical specs|
|Demulsification value||New oil≤15min,running oil≤30min|
|Clean degree||≤3 Grade|
1.After a certain period of running, the machine should be checked to see whether:
a) The electrical control system is safe and reliable;
永信贵宾网b) The temperature controller is sensitive, reliable and accurate;
永信贵宾网c) Oil seals of the pump shaft are broken with leakage;
永信贵宾网d) There is any blockage with the running system and any abnormal noise with pumps or related motors;
永信贵宾网e) There is any air or oil leakage with the oil running system and at sealing joints.
2.After each 3000 hours’ running, grease shall be replenished to prevent motors from being burnt.
3.Special vacuum pump oil or lubricating oil N46 should be used fro the vacuum pump and oil replaced or replenished if necessary at any time.
4.If the machine will not be used over 1 month, Place the machine in a dry environment with the panel door and all valves closed, and the machine proper protected by a covering.